Scuplture Bases and mounting instruction

My kinetic sculptures come with a bracket that fit standard size pipe (I dont ship poles unless you want to pay $25.00 shipping for a $10 pole. My smaller pieces have a bracket that fits a 3/4 in .I.D.water pipe and my larger sculptures use a 1 in .I.D. water pipe both available at any hardware store. Galvanized is best.
To instal on your pole dig a hole 16 in deep by 8 inches wide and set in pole. Phen prop the pole in a level position and add one bag of Quick-crete and water .
When you have completed that check the pole for level again.
The pole must be level for the piece to work properly.

I do make custom bases for all of my pieces. They start at $500.00 dollars and go up depending on size. Shown are just a few examples. I do offer custom ground or roof mount bases for any of my pieces, these are just a couple of examples. All roof mounted pieces must be grounded for lightning!!!! To install my pieces with a base you will need to poor a concrete pad 2 ft, by 2 ft. for smaller pieces and 3ft. x 3 ft. for larger pieces and at least 6 in. thick for both. If you need further instructions call me at 512 396 4041
Previous EntryNext Entry
Site Design ©2005-2012 Lucid Crew : Austin Web Design